How to remove the circular forms? What is the order of the demoulding? Today, a customer consults us because he often uses circular formss at the construction site, but the formwork will be damaged to varying degrees after each mold removal. When we ask him, when you use the tool for demolishing, he said that it is directly removed by hammer and pliers. Isn't it the same as the steel formwork? If the formwork is to be removed in this way, it will be bad. The circular forms itself is made of wooden material. It is definitely different from other types of formwork removal methods. In particular, it cannot be dismantled with tools. It is known that the circular forms is spliced and installed during installation. The mold should also be removed from the sheet. First remove the vertical steel pipe and the wooden side, then remove the matching steel strip and remove the formwork below the beam. At this point, the formwork can be tapped lightly, and the crack can be opened by the position of the concave and convex groove. This is mainly because the architectural circular forms is made of wood material, which is elastic and easy to remove. In fact, this process is not so complicated. First, the wooden side fixed on the periphery of the formwork is disassembled, and then the method opposite to the formwork installation step can be easily removed.
There is also a layer of plastic coated paper on the surface of the plastic circular formwork produced by Fangyuan Building Mould. Whether it is demoulding or construction, it must be protected. In the process of dismantling, it is necessary to avoid hard knocking to protect the surface of the formwork. The paper is not destroyed. The effect of our formwork release water is attributed to the film paper. If the film of this circular forms is damaged, the number of turns may be affected. After dismantling, it should be classified in time and stored properly. Screw nuts are easy to be lost and must be properly kept. The demoulding work of the high-rise construction can be carried out by means of the tower crane to avoid the construction of the circular formwork being broken. After the formwork is removed, clean the debris on the inner wall and brush the release agent evenly for the next use.
You should know how to demolish the circular forms. It is really a small formwork. Naturally, the demoulding is so happy. Only the construction workers use a wooden strip to gently tap the concave and convex slots of the circular forms. The two formworks are generally You can demould, you can not use the steel tool to force the formwork hard to prevent the concave and convex slots of the circular forms from being damaged.
To say that the wood circular column formwork is good, it is waterproof, heat-insulating and...read more
shear wall, retaining wall construction in a simple wayread more
Square Circle Formwork® is a manufacturer and supplier of formwork products which aim to meet the needs of the current formwork market with our labor saving and environmental-friendly formwork system.