Installation of the circular column forms Fangyuan company has published a lot of information, presumably everyone is familiar with the template construction plan, but some of the installation of the cylindrical template practical small tips no construction hundreds of times thousands of times is not refined, this does not Fangyuan's network department Xiaobian reservation technology department gives you an example to answer the difficult problems that are often encountered in the installation of cylindrical formwork.
The method of splicing and installing the circular column forms is well understood, because the edge of the cylindrical wood formwork produced by the square-shaped building mold has anti-leakage design of the concave-convex groove, and some construction units may use the concave-convex groove to be worn out by the template. The template is very strong, but this concave groove is far weaker than the template. Besides, there are a lot of facilities on the construction site. If you don’t pay attention to it, you can scrape it. For example, some large-diameter cylindrical molds, manual handling. No, it can only be lifted by means of machinery. If you don't pay attention to the two ends of the template, the template will be damaged. In fact, most of the construction units will pay attention to the template. When the template is transported, our manufacturers will simply pack the surface of the template. On the one hand, it prevents the wear of the template by the logistics and transportation, on the other hand, it is also considered for the construction unit. Because the construction site may stack a lot of tools, the simple-packed wooden cylindrical template will not be easily damaged.
There are still some round templates that cannot be stitched together in time. Why? The template can't be spliced mostly because there is no clean concrete residue between the templates. Just like the concave groove design we started, the groove is easy to be cemented. If the construction is finished, it will not be cleaned. Then use the circle next time. The template is not as good as the first time. In fact, no matter what kind of template, as long as it is used for construction, the surface must be cleaned after demoulding. On the one hand, the template can be demoulded more smoothly, and on the other hand, the template can be improved. The number of uses, as well as the use of architectural circle templates.
For the construction of wooden cylindrical formwork, you should remember that the most impressive...read more
The new square column clamp is a single-bend adjustable building square column formwork clamp. It...read more
Which is the domestic wood circular column formwork manufacturer? The answer is definitely Fangyuan...read more
Square Circle Formwork® is a manufacturer and supplier of formwork products which aim to meet the needs of the current formwork market with our labor saving and environmental-friendly formwork system.